S&B JLT Cold Air Intake Kit 2016-19 Camaro LT1 6.2L Tuning Required

JLT's New Cold Air Intake kits for the 2016-2021 Camaro in textured black plastic Finish. Designed to make huge power this new kit has a large 120mm ID through out the tube, with a 5 inch bell mouth at the MAF.

This huge 5 inch opening requires a huge filter. We love the tapered flange Design and Powerstack filtered ends of S and B's filters and ended up with a monster 5x7 inch filter. With deep pleats, you don't get much better than this. Finish it off with a silicone reducer and stainless clamps and you got the Best Intake on the market!!!

Molded In MAF
It's a full 120mm ID at the MAF area.

Heat Shield

• Includes ABS plastic Heat Shield to block engine heat at idle and low speed.
• It incorporates the fresh air inlet from the grill.
• It uses a large area to make sure the filter has tons of cool air.

Kit Includes:

• JLT Black Textured Plastic Intake Tube
• Silicone Reducer
• 5x7 S and B Powerstack Air Filter Red Oil
• ABS Heat Shield
• HD Clamps, and all needed hardware

Gains and Testing
Up to up to 25 RWHP and RWTQ peak Gains, but as high as 36 RWHP and RWTQ have been seen through out the RPM range when used with our custom tune!

Tuning
A JLT specific tune is Required with this kit.
Note: This product is NOT CARB (California Air Resource Board) Exempt. It is not for legal sale or use in the state of CA or any other states adopting CA emission standards and require a CA Executive Order (EO) number. Any orders placed for this item with a CA ship to address will be cancelled.