S&B JLT Cold Air Intake 2020-2021 GT500 No Tuning Required

Intake Tube. Computer Designed and HUGE! We were able to Design this tube to use all of the available space, the tube is 6 inch at the filter end and smoothly tapering down to 4.5 inch at the Throttle body side. Keeping the Intake Tube a half inch bigger than the stock throttle body in anticipation of aftermarket offerings.

Heat Shield
The rotational molded plastic Heat Shield blocks engine heat at idle and low speed. The Intake Tube passes through the Heat Shield to have a Complete seal with the hood acting as the lid to the air box. Our shield incorporates the fresh air inlet from the grill for the factory style ram air effect.

Tuning
No Tuning is Required with this Intake system

Power Gains

• 25-30 RWHP on a stock GT500
• 30 and up on a modded GT500

Kit Includes:

• JLT Black Textured Intake Tube
• Silicone Coupler
• 6x9 inch S and B Powerstack Air Filter Red Oil
• Heat Shield and Fresh Air duct
• HD Clamps and all needed hardware

Air Filter
We use only the best Air Filters made by S and B to our specifications. We love S and B's tapered flange Design and Powerstack filtered ends. With a huge 6 inch opening on the tube we needed a huge filter. The result is a monster 6x9 inch filter.

Note: This product is NOT CARB (California Air Resource Board) Exempt. It is not for legal sale or use in the state of CA or any other states adopting CA emission standards and require a CA Executive Order (EO) number. Any orders placed for this item with a CA ship to address will be cancelled.